Home › Capabilities › On-Site Technical Support
Capabilities

On-Site and Remote Technical Support After Delivery

Most problems are settled with a drawing, a photograph and a phone call. Some are not. When a fit issue or a complaint needs someone standing at the machine, our engineers travel — arranged case by case, rather than promised as a standing presence we cannot staff.

Request a Quote
Scope

Four things that trigger support

A fit issue at your assembly

Two parts that measured correctly but do not go together: the joint is reviewed against both drawings, not only ours.

A complaint on a delivered batch

Containment first, then root cause on the parts and the records, then a written correction.

A drawing change mid-series

The change is reviewed for manufacturability and cost before anything is cut, and price and lead time are re-confirmed in writing.

A first article that fails on your CMM

Measurement method, datum and part temperature are compared before anyone blames the geometry.

Measuring a part on the CMM during a dimensional investigation
Measurement repeated on the CMM during an investigation
Fitting a machined ring assembly by hand during final assembly
Where most fit issues are found: at the bench, before packing
Detail

What a corrective action actually contains

Containment

What you do with the parts you already have, and what we do with the ones still here — decided first, not last.

A verified cause

A cause that was checked against the parts and the records, not the first plausible explanation.

A process change

The fixture, the programme, the inspection step or the supplier that changed, and who owns it.

Evidence and a date

The evidence that the change worked, and the date the action closed.

How support runs

The engineer who quoted the part answers the question — there is no ticket queue and no account manager in between. Drawings, photographs, video and the inspection records are reviewed together first, because most issues end there. If the build cannot wait, travel is arranged case by case depending on where you are and what the problem needs; what we will not do is promise a standing on-site presence we cannot staff.

Process

From complaint to closed action

1

Same contact

The question reaches the engineer who quoted the part, with the records already attached.

2

Remote review

Drawings, photographs, video and inspection data compared against what was shipped.

3

On site if needed

Travel arranged case by case when the build depends on it and remote review has run out of road.

4

Written close-out

The cause, the change, the evidence and the date — in a document you can file.

FAQ

Frequently asked questions

Support on parts we made is part of the job, not a separate service line. Where travel is needed, it is quoted before it is booked.
A complaint is acknowledged as soon as it reaches us, and answered in writing once the parts and the records have been reviewed. We will not quote a response time we cannot hold.
For critical builds, yes — arranged case by case depending on where you are and what the problem needs. We will also tell you honestly when a video review is the better use of the time.
We answer for our own work. If a problem sits at the joint between our part and someone else's, we will still review that joint with you.
The part or the batch, the inspection records, photographs of the failure, and what it was assembled into.
Start a project

Request a Quote

Tell us about your program. The fields below help our engineering team prioritize recurring, long-term supply programs with equipment manufacturers.

What happens after you send your files

  • Within 1 business day an engineer — not a salesperson — reviews your drawings and replies.
  • DFM review: tolerances, material and risk flags, before any cutting begins.
  • Your quote includes a material-verification plan: grade, EN/DIN check, certificate strategy.

Critical features are verified in house · material chemistry confirmed by spectrometer · EN 10204 3.1 certificates available.

Prefer email? Write to us directly at info@prototech-machining.com

Recurring programs and orders of 1,000+ pcs are prioritised by our engineering team.
The number of parts per order — it lets us price tooling and batch setup correctly instead of guessing at a range.
Several different parts? Email your list and drawings to ellie@prototech-machining.com and we will quote them together.
e.g. 120 pcs · 6061-T6 aluminium · black anodise · mates with bracket PT-1042
Your files stay yours.
Drawings and CAD files are used only to quote and manufacture your parts. They are not shared with third parties, and we sign an NDA on request — even before you send anything.
Built for qualified programs.
Our form captures production type, annual quantity and project status up front — so we can focus engineering resources on long-term supply relationships, not one-off inquiries.
Need engineering input first?
Talk to our team about special materials, tolerances or a failed-supplier recovery before you send drawings.
↑