Small Precision Components
Small parts are not easy parts. At a few millimetres, clamping force, burrs and thermal effects are all proportionally larger — and the part is often the one that decides whether the assembly works.
What we produce
Small turned and milled components with cross-holes, flats, slots and threads — pins, bushings, spacers, fittings, small housings and connector bodies.
Range and volume
Conventional CNC turning covers Ø 2–65 mm with lengths to 300 mm; our Swiss-type cells take small-diameter work from Ø 0.5–20 mm. Live tooling allows milling features in the same cycle, so a small complex part can be finished in one set-up — economical from prototype to high volume.
Tolerances and verification
±0.005 mm on 3-axis work and ±0.01 mm standard on simultaneous 5-axis; critical dimensions verified on a Zeiss CMM for geometry and position, the TRIMOS V5 height gauge for heights and steps, and the AI-Vision system for fine features, with batch traceability and EN 10204 3.1 certificates available.