Home › Materials › G10 / FR4 Glass Fiber Machining for Insulating Fixtures
Materials

G10 / FR4 Glass Fiber Machining for Insulating Fixtures

G10 and FR4 are glass-cloth reinforced epoxy laminates used where an electrically insulating, dimensionally stable plate must hold machined features. We mill, drill, slot and profile both grades to your drawing — from insulating spacers to comb-shaped test carriers. G10 is the general-purpose grade; FR4 is the flame-retardant grade. Electrical and thermal values are confirmed against the data sheet for the exact grade supplied.

Request a Quote
Why ProtoTech

Machined to the grade, not to a guess

Insulation in the material itself

The dielectric property belongs to the laminate, not to a coating — machined edges and bores stay insulating.

Stable, low-moisture plate

Glass-epoxy laminate holds its shape through humidity and handling better than unfilled plastics, so fixture features stay true.

Clean slots and bores

Grade-appropriate tooling and backing support avoid fibre breakout and delamination on thin comb teeth and drilled holes.

Technical data

G10 / FR4 Machining

What we confirm before cutting — grade-specific values come from the supplied data sheet.

CapabilitySpecification
MaterialG10 / FR4 — glass-cloth reinforced epoxy laminate (G10 general purpose, FR4 flame retardant)
Typical tolerance±0.01 mm on machined features, confirmed against your drawing
ProcessesCNC milling, drilling, countersinking, slotting, profiling, pocketing
Milling envelopeUp to 2000 × 1000 mm
ToolingCarbide / PCD cutters; feeds and tool wear managed for glass-fibre laminate
Typical usePCB test fixtures · insulation panels · comb carriers · spacers · instrument plates
Electrical / thermal dataPer the data sheet of the grade supplied — tell us G10 or FR4 and any flame-retardant requirement
InspectionZeiss CMM on critical features; first-article inspection report on request
Prototype lead timeTypically 5–10 working days
Photos

Parts we have machined

G10/FR4 parts from our workshop — described by what is in the photograph, not by customer or project name.

Green G10/FR4 glass-epoxy plate with assorted drilled holes and elongated slots.
Drilled G10/FR4 plate with slots
Machined green glass-epoxy fixture plates with pockets, drilled holes and profiled edges.
Machined glass-epoxy fixture plates
Six green glass-epoxy comb-shaped parts with repeated narrow slots.
Comb-shaped glass-epoxy parts
How we work

From Drawing to Delivered Part

A transparent, engineering-led process for insulating components and fixtures.

1

Submit & Review

Send the drawing, the grade (G10 or FR4) and any insulation or flame-retardant requirement. Our engineers check tool access, slot widths and tolerances before cutting.

2

Quote & Material Plan

You receive a transparent quote and the material-verification plan for the specified grade — no assumed dielectric or temperature values.

3

Machine & Inspect

Grade-appropriate tooling, controlled feeds, then Zeiss CMM inspection on critical features and first-article reporting.

4

Deliver & Support

Kitted and labelled to your fixture plan, with engineering support for repeat orders and revisions.

FAQ

Frequently asked questions

Both are glass-cloth reinforced epoxy laminates. G10 is the general-purpose grade; FR4 is the flame-retardant grade. Tell us which grade your drawing calls for and we confirm the data sheet before cutting rather than assuming electrical or temperature values.
Yes. Thin comb features need grade-appropriate tooling and backing support to avoid delamination and fibre breakout. Send the drawing and we will quote slotting and profiling to print.
Tell us the grade and source you want. We machine customer-supplied laminate or source the specified grade for your program; we confirm the data sheet before cutting rather than quoting generic values.
Start a project

Request a Quote

Tell us about your program. The fields below help our engineering team prioritize recurring, long-term supply programs with equipment manufacturers.

What happens after you send your files

  • Within 1 business day an engineer — not a salesperson — reviews your drawings and replies.
  • DFM review: tolerances, material and risk flags, before any cutting begins.
  • Your quote includes a material-verification plan: grade, EN/DIN check, certificate strategy.

Critical features are verified in house · material chemistry confirmed by spectrometer · EN 10204 3.1 certificates available.

Prefer email? Write to us directly at info@prototech-machining.com

Recurring programs and orders of 1,000+ pcs are prioritised by our engineering team.
The number of parts per order — it lets us price tooling and batch setup correctly instead of guessing at a range.
Several different parts? Email your list and drawings to ellie@prototech-machining.com and we will quote them together.
e.g. 120 pcs · 6061-T6 aluminium · black anodise · mates with bracket PT-1042
Your files stay yours.
Drawings and CAD files are used only to quote and manufacture your parts. They are not shared with third parties, and we sign an NDA on request — even before you send anything.
Built for qualified programs.
Our form captures production type, annual quantity and project status up front — so we can focus engineering resources on long-term supply relationships, not one-off inquiries.
Need engineering input first?
Talk to our team about special materials, tolerances or a failed-supplier recovery before you send drawings.
↑