Home › Capabilities › CNC Machining of Aluminium Heat Sinks and Thermal Housings
Capabilities

CNC Machining of Aluminium Heat Sinks and Thermal Housings

We machine aluminium heat sinks and thermal housings — dense fin arrays, flat mounting bases, recessed cavities and drilled or tapped fixing features — to your drawing. Fins may start from extruded profile or from solid billet; we finish the interfaces, bores and cavities that determine how the part fits and performs. Material, finish and inspection scope are confirmed against your print and the supplied grade.

Request a Quote
Why ProtoTech

Liquid-cooled designs follow the same machining logic but carry a different set of risks: sealing faces, burr-free passages and leak testing. We cover those under cold plates and coolant manifolds for data centres.

Flat interfaces, clean fins

Flat base, clean interfaces

A heat sink only works if its mounting face sits flat; we machine and inspect the interface faces, not just the visible fins.

Fins without breakout

Fine fins and thin walls need controlled tooling and support to avoid chatter and burrs at the fin roots.

Cavities and fixing features to print

Recessed pockets, tapped holes and locating tabs are machined to the drawing and verified on the CMM.

Technical data

Heat Sink Machining

What we confirm before cutting — grade-, profile- and finish-specific values come from your drawing and data sheet.

CapabilitySpecification
MaterialsAluminium grades per your drawing; other thermal alloys quoted on request
Typical tolerance±0.005 mm on 5-axis work, confirmed against your drawing
ProcessesCNC milling, facing, pocketing, drilling, tapping, countersinking, deburring
Milling envelopeUp to 2000 × 1000 mm
FeaturesFin arrays · flat mounting bases · recessed cavities · through and tapped holes · locating tabs
Surface finishDown to Ra 0.2 µm on metals, confirmed per feature
Fin stockExtruded profile or solid billet, per your drawing — extrusion arranged with qualified partners where required
Surface treatmentAnodising and other finishes placed with qualified subcontractors; quality and delivery remain our responsibility
InspectionZeiss CMM on critical features; first-article inspection report on request
Prototype lead timeTypically 5–10 working days
Photos

Heat sinks we have machined

Heat sinks and thermal housings from our workshop — described by what is in the photograph, not by customer or project name.

Two machined aluminium parts: a dense finned heat sink above its base plate with a square opening, mounting holes and edge tabs.
Finned heat sink and its machined base plate
Two machined aluminium parts: a finned heat sink below its base plate with recessed channels and two square pockets.
Finned heat sink and recessed base plate
Machined aluminium housings with multiple rectangular cavities, screw holes and edge tabs, beside a plate with four recessed channels.
Multi-cavity aluminium housings and recessed plate
How we work

From Drawing to Delivered Part

A transparent, engineering-led process for thermal components.

1

Submit & Review

Send the drawing, the aluminium grade and any flatness or finish requirement. Our engineers check tool access to fin roots, datum faces and tolerances before cutting.

2

Quote & Material Plan

You receive a transparent quote and the route for the fin stock — extruded profile or solid billet — with inspection and any surface treatment included.

3

Machine & Inspect

Controlled tooling for fine fins, then Zeiss CMM inspection on interface faces and critical features, with first-article reporting.

4

Deliver & Support

Parts packed to protect fin tips, labelled to your drawing, with engineering support for repeat orders and revisions.

FAQ

Frequently asked questions

Both routes are quoted to the drawing. Dense fin arrays often start from extruded profile; where the design calls for it we machine fins and features from solid billet. Extrusion, when required, is arranged with qualified partners — send us the profile or drawing and we confirm the route.
Yes. Flatness of the interface face is machined and inspected on our Zeiss CMM; we treat the mounting face and locating features as critical, not just the fins.
Surface treatment such as anodising is placed with qualified subcontractors close to our plant, with quality and delivery responsibility staying with us. Tell us the finish and we include it in the quotation.
Start a project

Request a Quote

Tell us about your program. The fields below help our engineering team prioritize recurring, long-term supply programs with equipment manufacturers.

What happens after you send your files

  • Within 1 business day an engineer — not a salesperson — reviews your drawings and replies.
  • DFM review: tolerances, material and risk flags, before any cutting begins.
  • Your quote includes a material-verification plan: grade, EN/DIN check, certificate strategy.

Critical features are verified in house · material chemistry confirmed by spectrometer · EN 10204 3.1 certificates available.

Prefer email? Write to us directly at info@prototech-machining.com

Recurring programs and orders of 1,000+ pcs are prioritised by our engineering team.
The number of parts per order — it lets us price tooling and batch setup correctly instead of guessing at a range.
Several different parts? Email your list and drawings to ellie@prototech-machining.com and we will quote them together.
e.g. 120 pcs · 6061-T6 aluminium · black anodise · mates with bracket PT-1042
Your files stay yours.
Drawings and CAD files are used only to quote and manufacture your parts. They are not shared with third parties, and we sign an NDA on request — even before you send anything.
Built for qualified programs.
Our form captures production type, annual quantity and project status up front — so we can focus engineering resources on long-term supply relationships, not one-off inquiries.
Need engineering input first?
Talk to our team about special materials, tolerances or a failed-supplier recovery before you send drawings.
↑