Home › Capabilities › Assembly Services
Capabilities

Assembly and Sub-Assembly for Equipment Components

Machined parts do not have to arrive as a box of loose components. We build sub-assemblies and bench assemblies, check fit and alignment before packing, and ship one part number with one inspection record — so the fitting work moves off your line and onto ours.

Request a Quote
Scope

What we assemble

Frames and structures

Machined frames, brackets and plates joined and squared on the bench, with hole patterns checked against the mating part.

Rings, housings and inserts

Rings, housings and machined inserts fitted with the hardware your bill of materials calls for.

Fitting and fastening

Fasteners installed to your BOM and checked for presence and engagement before packing, part by part.

Sub-assembly as one item

A multi-part-number build becomes one item: one carton, one packing list, one inspection record.

Assembling machined frames and inserts on the bench
Frames and inserts assembled on the bench before packing
Fitting a machined ring assembly by hand during final assembly
A machined ring assembly checked by hand during final assembly
Detail

What it changes on your line

Assembly hours leave your line

Bench work that eats a day of a fitter's time is done here, checked and documented, before the crate is closed.

A fit problem surfaces here, not there

If two parts do not go together, we find out in Shenzhen while both are still on our floor — not on your line with a delivery date at risk.

One record instead of many

The inspection record covers the assembly, not only the individual components that went into it.

Scope — and what we hand back

Mechanical assembly is what we do: fitting, fastening, alignment, insert installation and the checks that go with them. What we do not do is electrical wiring, electronics integration, software flashing or functional testing against your product specification — those stay with you or with a specialist. If an assembly needs them, we say so at quotation rather than discover it at packing.

Process

How an assembly project runs

1

BOM review

Your bill of materials, the drawings and the mating part are reviewed together. Missing hardware is flagged before the build, not during it.

2

Trial build

The first assembly is built and checked against the mating part; if a fixture or a shim is needed, it is made here.

3

Assembly

Fitting, fastening and alignment, with the checks recorded as they happen.

4

Packing

Protective packaging for a finished assembly, not for loose parts: the item that arrives is the item that was checked.

FAQ

Frequently asked questions

Yes. If you source other components elsewhere, they can be shipped to us and assembled with the parts we machine, provided the drawings and the mating requirements are clear.
No. Our assembly scope is mechanical: fitting, fastening, alignment and insert installation. Wiring, electronics and software stay with you or with a specialist.
Fit and alignment are checked during the build, and the finished assembly is checked against the drawing and the mating part before packing. The record ships with it.
Yes. A finished assembly is packed to survive as an assembly, not as loose parts, and the packing list is written at assembly level.
The bill of materials, a drawing for each component, the mating part or its interface dimensions, and the quantity. If the assembly has a test you expect, say so at quotation.
Start a project

Request a Quote

Tell us about your program. The fields below help our engineering team prioritize recurring, long-term supply programs with equipment manufacturers.

What happens after you send your files

  • Within 1 business day an engineer — not a salesperson — reviews your drawings and replies.
  • DFM review: tolerances, material and risk flags, before any cutting begins.
  • Your quote includes a material-verification plan: grade, EN/DIN check, certificate strategy.

Critical features are verified in house · material chemistry confirmed by spectrometer · EN 10204 3.1 certificates available.

Prefer email? Write to us directly at info@prototech-machining.com

Recurring programs and orders of 1,000+ pcs are prioritised by our engineering team.
The number of parts per order — it lets us price tooling and batch setup correctly instead of guessing at a range.
Several different parts? Email your list and drawings to ellie@prototech-machining.com and we will quote them together.
e.g. 120 pcs · 6061-T6 aluminium · black anodise · mates with bracket PT-1042
Your files stay yours.
Drawings and CAD files are used only to quote and manufacture your parts. They are not shared with third parties, and we sign an NDA on request — even before you send anything.
Built for qualified programs.
Our form captures production type, annual quantity and project status up front — so we can focus engineering resources on long-term supply relationships, not one-off inquiries.
Need engineering input first?
Talk to our team about special materials, tolerances or a failed-supplier recovery before you send drawings.
↑